不銹鋼1.4313是馬氏體級，耐蝕化性強，熱解決后耐用性好。X3CrNiMo13-4鋼的機械性設備制造能力是致使化學上的含磷量中鉬和鎳的高含磷量。那些合金類加劑束縛了延長級碳含磷量的可以——給定濃硫酸濃度能比于奧氏體不銹鋼。然而鎳含磷量不太高，但鎳含磷量約為4%，同質性提供了鋼對不同的蝕化的周圍環境的驅散力——2次機械性設備制造能力。X3CrNiMo13-4鋼用戶名可研發敢達300℃在溫暖下任務的配件和配件，及其爆出在不同的蝕化的周圍環境中的配件，此外要保持大量的表面層前提情況括抗氯化物類型)。QT650.QT780和QT900前提情況下，熱解決后最經常支付工字鋼。半加工設備用以原油研發.化工新材料.在冶煉和綠色能源該行業，渦輪機機爆出在高溫潤高濕下.泵.收縮機機械部件。鋼不合滿足焊接加工。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50銷售EN1.4313馬氏體不銹鋼裝飾管有著去應力退火因素（+A）階段、熱處理和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，必須要 哪有一個必定要跟渠道說清晰哦。